home *** CD-ROM | disk | FTP | other *** search
/ NetNews Offline 2 / NetNews Offline Volume 2.iso / news / comp / sys / cbm / 603 < prev    next >
Encoding:
Internet Message Format  |  1996-08-05  |  1.2 KB

  1. Path: mserv.wizvax.net!news
  2. From: root@tardis.wizvax.net (Tony Postmayer)
  3. Newsgroups: comp.sys.cbm
  4. Subject: Re: Help: 1541-II problem
  5. Date: Thu, 11 Jan 1996 17:52:15 GMT
  6. Organization: Wizvax Communications, Troy, N.Y. 12180 USA
  7. Message-ID: <30f54d92.860070@199.181.141.3>
  8. References: <4d3anh$6k@news.tuwien.ac.at>
  9. NNTP-Posting-Host: tardis.wizvax.net
  10. X-Newsreader: Forte Agent .99c/16.141
  11.  
  12. >
  13. >I have a slight problem with my 1541-II.
  14. >
  15. >When I plug in the power cable only and turn on power, both LEDs start to 
  16. >light. After a second or so, one of the two LEDs starts to flash, but doesnt
  17. >stop any more. There's also no motion of the motor. Same thing is even when 
  18. >the floppy is normally connected to the C64. 
  19. >Besides, I also cant access it in any way...
  20. >
  21. >So, what can I do ? Where can i start ?
  22. >
  23.  
  24. When the drive is powered up or reset, it does some self-check
  25. diagnostics.  If one of the tests should fail, the drive will blink
  26. the LED in a repetitive pattern which signifies where the error
  27. occurred.  (for example, three blinks might be one of the ROMs)
  28.  
  29. I don't have the blink codes right at hand, however if I run across
  30. them I'll post them to this newsgroup.  In the meantime, what specific
  31. blink pattern are you seeing?
  32.  
  33.   Tony -
  34.  
  35.  
  36.